[coreboot] ASUS M2N-SLI Deluxe
spooky85 at gmail.com
Sat Jan 3 00:53:58 CET 2009
2009/1/2 Myles Watson <mylesgw at gmail.com>:
>> -----Original Message-----
>> From: coreboot-bounces+mylesgw=gmail.com at coreboot.org [mailto:coreboot-
>> bounces+mylesgw=gmail.com at coreboot.org] On Behalf Of Christian Ruppert
>> Sent: Friday, January 02, 2009 11:51 AM
>> To: coreboot at coreboot.org
>> Subject: Re: [coreboot] ASUS M2N-SLI Deluxe
>> ok guys,
>> a little summary from my side:
>> i've tried the patch from uwe  but there are some issues with the
>> baud rate and also the same problem as fred  had but with a
>> different output.
>> the baud problem could be solved with a small workaround: just change
>> to 57600 in minicom but leave 115200 in the bios source.
>> uwe wrote then a second patch (see attachment, works with the lastest
>> svn rev. (remove the old patch before apply the new one)) which fixed
>> the baud problem and other stuff but not the "poweroff" problem.
>> my first boot log was:
>> coreboot-184.108.40.206Fallback Fr 2. Jan 17:10:59 CET 2009 starting...
>> *sysinfo range: [000cf000,000cf730)
>> Enabling routing table for node 00 done.
>> Enabling UP settings
>> core0 started:
>> started ap apicid: 01
>> NC node|link=00
>> begin msr fid, vid 3107121207110202
>> Current fid_cur: 0x2, fid_max: 0x11
>> Requested fid_new: 0x11
>> FidVid table step fidvid: 0xe
>> 200MHZ step fidvid: 0x10
>> 100MHZ step fidvid: 0x11
>> end msr fid, vid 3107120707110211
>> entering optimize_link_incoherent_ht
>> entering ht_optimize_link
>> pos=0x8a, unfiltered freq_cap=0x8075
>> pos=0x8a, filtered freq_cap=0x75
>> pos=0x52, unfiltered freq_cap=0x807f
>> pos=0x52, filtered freq_cap=0x7f
>> freq_cap1=0x75, freq_cap2=0x7f
>> dev1 old_freq=0x0, freq=0x6, needs_reset=0x1
>> dev2 old_freq=0x0, freq=0x6, needs_reset=0x1
>> width_cap1=0x11, width_cap2=0x11
>> dev1 input ln_width1=0x4, ln_width2=0x4
>> dev1 input width=0x1
>> dev1 output ln_width1=0x4, ln_width2=0x4
>> dev1 input|output width=0x11
>> old dev1 input|output width=0x11
>> dev2 input|output width=0x11
>> old dev2 input|output width=0x11
>> after ht_optimize_link for link pair 0, reset_needed=0x1
>> after optimize_link_read_pointers_chain, reset_needed=0x1
> It looks like you're getting to the first reset, then that isn't working.
> Have you tried commenting out the reset at that point to see how much
> farther you get?
> The reset is to make the HT optimizations take effect, so it will be slower
> but should continue.
i commented soft_reset(); in cache_as_ram_auto.c but still the same.
More information about the coreboot