[coreboot] Coreboot can't boot to kernel.
Joseph Smith
joe at settoplinux.org
Mon Feb 23 15:25:24 CET 2009
On Mon, 23 Feb 2009 19:03:15 +0800, andery lin <anderylin at gmail.com> wrote:
> Dear Sir,
>
> I do following procedure:
> 1. Modify ../filo-0.4.2/Config
> change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2
> console=ttyS0,115200"
> 2. make for [filo-0.4.2]
> 3. vi ../coreboot-v2/targets/amd/dbm690t/Config.lb
> 4. change to payload
> /usr/local/linuxbios/coreboot-v2/filo-0.4.2/filo.elf
> 5. .. /targets/amd/dbm690t/dbm690t make
> 6. cat video.bios.bin coreboot.rom >> LinuxBios.rom
> 7. inuxBios.rom write to flash
> 8. I had setup Fedora9 to my hard disk and in normal BIOS flash, it
> could
> boot up.
> So, I change to Coreboot BIOS flash and then it could not boot up.
> I don't know why was show "file not found "
>
> How to modify the "filo Config" ?
> My fedora9 ==> /boot/grub/menu.lst
> root(hd0,0)
> kernel / vmlinuz-2.6.24-14.fc9.i686 ro
> root=UUID=1fef4ac9-c286-4c63-a9f6-f27869d4328c rhgb quiet
> initrd /initrd-2.6.25-14.fc9.i686.img
>
> So coreboot ../filo-0.4.2/Config
> change to AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda2
> console=ttyS0,115200"
> or
> change to AUTOBOOT_FILE = "hda0:/vmlinuz root=/dev/hda1
> console=ttyS0,115200"
> Is right? but it could not work.
>
> Those are error message as attached pitcher.Thanks a lot.
>
try AUTOBOOT_FILE = "hda0:/vmlinuz-2.6.24-14.fc9.i686 ro
root=UUID=1fef4ac9-c286-4c63-a9f6-f27869d4328c rhgb quiet
initrd=/initrd-2.6.25-14.fc9.i686.img
--
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org
More information about the coreboot
mailing list