[coreboot] SB600 HDA can't find codec fix

[Carl-Daniel Hailfinger]

Hi Dan,

sorry for chasing you around in circles on that issue.

On 04.02.2009 05:14, Li, Maggie wrote:
> Dan 
>
> I think you made a mistake. It should be “sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB600_SM, 0);”, not “sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);” in your file.
>
> In my last letter, there is a writing error. We should say that dev_find_device is more reliable than dev_find_slot
>   

I believe dev_find_device is indeed best. Anyway, I think I can make
that change locally and commit if you're OK with that.

Regards,
Carl-Daniel

> -----Original Message-----
> From: Carl-Daniel Hailfinger [mailto:c-d.hailfinger.devel.2006 at gmx.net] 
> Sent: Monday, February 02, 2009 10:26 AM
> To: Li, Maggie
> Cc: Dan Lykowski; Marc Jones; coreboot at coreboot.org
> Subject: Re: [coreboot] SB600 HDA can't find codec fix
>
> Hi Maggie,
>
> while your point about pci_find_device is valid, I think that
> dev_find_device is the function Dan should choose. It allows us to
> address the PCI devices even if their bus locations are shifted which is
> possible with some AMD chipsets and may also be true for boards with
> multiple chipsets.
> In general, we want to use functions which can deal with non-default bus
> topologies.
>   
-- 
http://www.hailfinger.org/