[coreboot] making coreboot for Tyan s4882?

David Melik dchmelik at gmail.com
Tue Feb 3 08:13:42 CET 2009

>>The make error for s4882 being discussed:
>>objcopy --gap-fill 0xff -O binary coreboot coreboot.strip
>>make[1]: *** No rule to make target `grub2', needed by `payload'.  Stop.
>>make[1]: Leaving directory `/root/coreboot-v2-3923/targets/tyan/s4882/s4882/normal'
>>make: *** [normal/coreboot.rom] Error 1

> I meant targets/tyan/s4882/s4882/grub2.elf.  Sorry.
> Myles

(Perhaps 'payload' should be in $target in the first place.)  I did that 
and got the exact same results (I tried payload 'grub2' and './grub2,' 
and also put it in 'fallback.')  I wrote a longer letter this afternoon, 
but Thunderbird did not send it or save a copy, so this will be short.  
I will still say I noticed this funny line in s4882: 'cp -f 
$TYANMB"_coreboot.rom" /home/yhlu/.'  Since make says it has no rule for 
'target 'grub2,' needed by payload,' I searched through config.py for 
'target,' 'image,' etc. and I do not see how it works.


More information about the coreboot mailing list