[coreboot] vga not working
mylesgw at gmail.com
Mon Aug 17 20:10:22 CEST 2009
> Actually it should work because in devices\device.c is the
> set_vga_bridge_bits() function. This function
> scans all the devices for PCI_BASE_CLASS_DISPLAY and
> PCI_CLASS_DISPLAY_OTHER. So
> I guess 00.02.00 or 00.03.00 should be assigned with the PCI_BRIDGE_CTL_VGA
> as it will be the
> first found.
Setting up VGA for PCI: 07:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 03:04.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:03.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
00:03.0 is on the list, so it will be the one assigned.
> Now in the PCIe init function, the code pointed by Myles would be correct.
> Actually the device with
> PCI_BRIDGE_CTL_VGA set gets BCTRL.VGAEN flag set.
> I think it should be ok, right?
I just looked in pci_device.c, and the code there sets the bits in
pci_enable_resources() instead of init(). I'm not sure why that is, but you
might want to follow that lead for consistency.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot