[coreboot] Add VGA BIOS failed.

Maxmimilian Niedernhuber powerschorsch21 at yahoo.de
Sat Aug 1 21:52:41 CEST 2009

Hallo, thanks for your answer. I had the coreboot-read.bin from the
coreboot source "coreboot-v2-4475", it is just renamed (coreboot.rom). I
used the target for IEI_JUKI_511P board because it is near the same as I
have. I have two EEProm Chips ... it should be safe to test coreboot on
this board.
I changed the Config.lb, because I want to use seabios:

payload /root/coreboot/bios.bin.elf-0.4.1

And I had a problem with the Rom size. ... I changed this:


Then coreboot.rom compiled without an error. 
The next Step was to add the VGA bios. But it dosnt worked.
Sorry for my bad english.

More information about the coreboot mailing list