[coreboot] build service results for r4124

coreboot information info at coresystems.de
Thu Apr 16 23:32:49 CEST 2009


Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "ruik" checked in revision 4124 to
the coreboot repository. This caused the following 
changes:

Change Log:
Following patch flushes the instruction queue when we set PE=0. This is normally
done by FAR JMP, but here it is more tricky because we run at EIP>1MB. Many
thanks to Marc and Kevin to tell me how to fix it

The trick is to use 0x66 prefix (done with ljmpl) it will allow to jump in real
mode to any EIP addresses  ;)

Signed-off-by: Rudolf Marek <r.marek at assembler.cz>
Acked-by: Peter Stuge <peter at stuge.se>



Build Log:
Compilation of digitallogic:msm800sev is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4124&device=msm800sev&vendor=digitallogic&num=2
Compilation of pcengines:alix1c is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4124&device=alix1c&vendor=pcengines&num=2


If something broke during this checkin please be a pain 
in ruik's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system






More information about the coreboot mailing list