[coreboot] [v2] r4078 - in trunk/coreboot-v2: src/devices src/mainboard/emulation/qemu-x86 targets/emulation/qemu-x86

[svn at coreboot.org]

Author: rminnich
Date: 2009-04-06 22:38:34 +0200 (Mon, 06 Apr 2009)
New Revision: 4078

Modified:
   trunk/coreboot-v2/src/devices/pci_rom.c
   trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Options.lb
   trunk/coreboot-v2/targets/emulation/qemu-x86/Config.lb
Log:
Some changes for option roms: 
- don't make users pick the name. Names for option roms are in the v3-defined
format of pci%04x,%04x.rom with the vendor and device id filling in the 
%04x. 
- users pass in vendor and device id. 
- users pass in a dest. If the dest is 0, the address of the ROM image in 
FLASH is returned. If the address is non-zero, then the decmpressor is called,
and it will make sure the ROM image is copied to the destination (even 
in the uncompressed case).

move qemu over to always using ROMFS

Signed-off-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Patrick Georgi <patrick.georgi at coresystems.de>


Modified: trunk/coreboot-v2/src/devices/pci_rom.c
===================================================================
--- trunk/coreboot-v2/src/devices/pci_rom.c	2009-04-06 16:03:53 UTC (rev 4077)
+++ trunk/coreboot-v2/src/devices/pci_rom.c	2009-04-06 20:38:34 UTC (rev 4078)
@@ -31,32 +31,40 @@
 
 struct rom_header * pci_rom_probe(struct device *dev)
 {
-	unsigned long rom_address;
+	unsigned long rom_address = 0;
 	struct rom_header *rom_header;
 	struct pci_data *rom_data;
 
 	if (CONFIG_ROMFS) {
-		rom_address = (unsigned long) romfs_load_optionrom(dev->vendor, dev->device, NULL);
+		void *v;
 		/* if it's in FLASH, then it's as if dev->on_mainboard was true */
-		dev->on_mainboard = 1;
-		/* and we might as well set the address correctly */
-		dev->rom_address = rom_address;
-	} else if (dev->on_mainboard) {
+		v = romfs_load_optionrom(dev->vendor, dev->device, NULL);
+		printk_debug("In cbfs, rom address for %s = %lx\n", 
+				dev_path(dev), rom_address);
+		if (v) {
+			dev->rom_address = v;
+			dev->on_mainboard = 1;
+		}
+	} 
+
+	if (dev->on_mainboard) {
 		/* this is here as a legacy path. We hope it goes away soon. Users should not have to 
 		 * compute the ROM address at build time!
 		 */
                 // in case some device PCI_ROM_ADDRESS can not be set or readonly 
 		rom_address = dev->rom_address;
+		printk_debug("On mainboard, rom address for %s = %lx\n", 
+			dev_path(dev), rom_address);
         } else {
 		rom_address = pci_read_config32(dev, PCI_ROM_ADDRESS);
+		printk_debug("On card, rom address for %s = %lx\n", 
+				dev_path(dev), rom_address);
 	}
 
 	if (rom_address == 0x00000000 || rom_address == 0xffffffff) {
 		return NULL;
 	}
 
-	printk_debug("rom address for %s = %lx\n", dev_path(dev), rom_address);
-	
 	if(!dev->on_mainboard) {
 		/* enable expansion ROM address decoding */
 		pci_write_config32(dev, PCI_ROM_ADDRESS,

Modified: trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Options.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Options.lb	2009-04-06 16:03:53 UTC (rev 4077)
+++ trunk/coreboot-v2/src/mainboard/emulation/qemu-x86/Options.lb	2009-04-06 20:38:34 UTC (rev 4078)
@@ -49,7 +49,7 @@
 default CONFIG_CONSOLE_SERIAL8250=1
 default DEFAULT_CONSOLE_LOGLEVEL=8
 default MAXIMUM_CONSOLE_LOGLEVEL=8
-default CONFIG_ROMFS=0
+default CONFIG_ROMFS=1
 
 ## ROM_SIZE is the size of boot ROM that this board will use.
 default ROM_SIZE  = 256*1024

Modified: trunk/coreboot-v2/targets/emulation/qemu-x86/Config.lb
===================================================================
--- trunk/coreboot-v2/targets/emulation/qemu-x86/Config.lb	2009-04-06 16:03:53 UTC (rev 4077)
+++ trunk/coreboot-v2/targets/emulation/qemu-x86/Config.lb	2009-04-06 20:38:34 UTC (rev 4078)
@@ -10,12 +10,12 @@
 option HAVE_PIRQ_TABLE=1
 option IRQ_SLOT_COUNT=6
 
-romimage "image" 
+romimage "normal" 
 	option ROM_IMAGE_SIZE=0x10000
 	option COREBOOT_EXTRA_VERSION="-GRUB2"
 #	payload /home/stepan/core.img
 	payload ../payload.elf
 end
 
-buildrom ./coreboot.rom ROM_SIZE "image"
+buildrom ./coreboot.rom ROM_SIZE "normal"