[coreboot] build service results for r4060

[coreboot information]

Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "rminnich" checked in revision 4060 to
the coreboot repository. This caused the following 
changes:

Change Log:
These are some cleanups and changes. These are build and boot tested on qemu.
Some changes for option roms:
- don't make users pick the name. Names for option roms are in the v3-defined
format of pci%04x,%04x.rom with the vendor and device id filling in the
%04x.
- users pass in vendor and device id.
- users pass in a dest. If the dest is 0, the address of the ROM image in
FLASH is returned. If the address is non-zero, then the decmpressor is called,
and it will make sure the ROM image is copied to the destination (even
in the uncompressed case).

And some type and print cleanup.

Signed-off-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Myles Watson <mylesgw at gmail.com>




Build Log:
Compilation of a-trend:atc-6220 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4060&device=atc-6220&vendor=a-trend&num=2
Configuration of embeddedplanet:ep405pc is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4060&device=ep405pc&vendor=embeddedplanet&num=1
Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4060&device=sandpointx3_altimus_mpc7410&vendor=motorola&num=2
Configuration of totalimpact:briq is still broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4060&device=briq&vendor=totalimpact&num=1


If something broke during this checkin please be a pain 
in rminnich's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system