[coreboot] The patch of AMD DBM690T board
c-d.hailfinger.devel.2006 at gmx.net
Wed Sep 24 01:13:28 CEST 2008
On 23.09.2008 23:50, Marc Jones wrote:
> ron minnich wrote:
>> any suggested boards people can buy to try this out? I need to buy a
>> board anyway as i want to have two for development uses.
> It will probably require some minor porting but the GA-MA69G-S3H seems
> popular with some of our marketing people. It is AM2 instead of s1g1
> but that should be ok.
Looks nice. However, I was unable to find out whether it uses a LPC or
SPI ROM. According to this picture
there is at least no socketed ROM.
on the right, below the DIMM slot is a Winbond ACPI controller. There is
not even a single PLCC32 chip on the board.
The only option left is a soldered SOIC8 or SOIC16 SPI ROM. The SOIC8
chip below the SuperI/O here
unmarked (except a green spot), but it could be what we're looking for.
Marc, can you find out which ROM chip this board uses so that we can
assess the coreboot-friendliness of it?
More information about the coreboot