[coreboot] s289{1,2,5} whitespace (3583) and questions

[yhlu]

On Thu, Sep 18, 2008 at 8:32 AM, Myles Watson <mylesgw at gmail.com> wrote:
> I'd like to understand the v2 code for the Tyan s289{1,2,5} boards.  As part
> of that I fixed some whitespace.  It was committed in 3583.
>
> Here's a list of my questions so far (I'm trying to understand differences)
>
> auto.c:
>
> Why does s2895 include arch/cpu.h and amd/model_fxx/model_fxx_msr.h

> Why does s2895 not define K8_HT_FREQ_1G_SUPPORT

it is not tested

> Why does s2892 have report_bist_failure commented out
>
> cache_as_ram_auto.c:
>
> Why does s2892 have the soft_reset commented out, but still print ht_reset
> Why does s2892 not get the return value
>
> Options.lb:
> Why is _RAMBASE different for s2895 (0x100000) than s2892 and s2891 (0x4000)

should be ok.

> Why does s2891 use CONFIG_PCI_64BIT_PREF_MEM=1, but 2 and 5 don't
only test with that with that card need that feature.
>
> These three lines are missing from s2892:
> default ENABLE_APIC_EXT_ID=0
> default APIC_ID_OFFSET=0x10
> default LIFT_BSP_APIC_ID=0
should be ok, already disable with
ENABLE_APIC_EXT_ID=0
>
> failover.c:
> Only s2891 passes nodeid to early_mtrr_init_detected
> Only s2895 doesn't call enable_lapic()
>
> irq_tables.c:
> All the #if 0 code, is it needed for documentation?
should be corrected, so some uitil could do mapping between bus/dev to slot...

YH