[coreboot] Jetway J7F2 target

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Tue Sep 9 21:47:27 CEST 2008

On 09.09.2008 21:22, ron minnich wrote:
> On Tue, Sep 9, 2008 at 12:14 PM, Alex Mauer <hawke at hawkesnest.net> wrote:
>> Since the Jetway J7F2* and J7F4* motherboards appear to work fine, what
>> can be done about getting targets for them?
>> Mine at least (J7F2WE1G3) works without changing the irq_tables.  The
>> only change is in mainboard/via/epia-cn/Config.lb, changing "chip
>> superio/via/vt1211" to "chip superio/fintek/f71805f".
>> However, it would be nice(r) if there was a targets/jetway/j7f2 and
>> presumably a src/mainboard/jetway/j7f2.
>> I assume there would need to be some way of ensuring that the other
>> files, like mainboard.c, auto.c, etc. stayed synchronised between them
>> though.
>> What needs to be done for a j7f2 target to be created?
> staying in sync is not really an issue. sometimes a board you derived
> from changes, and you don't want those changes in your board.
> You are better off copying.
> So your first step is
> mkdir -p mainboard/jetway/jf72
> svn add mainboard/jetway/jf72
> svn cp (or whatever) the various epia cn files to that dir.


And that's why we reduced the amount and size of files to be copied when
the v3 architecture was designed.



More information about the coreboot mailing list