[coreboot] Serengeti dts

[Carl-Daniel Hailfinger]

On 30.10.2008 15:47, Myles Watson wrote:
>   
>> -----Original Message-----
>> From: Carl-Daniel Hailfinger [mailto:c-d.hailfinger.devel.2006 at gmx.net]
>> Sent: Thursday, October 30, 2008 6:55 AM
>> To: Myles Watson
>> Cc: Coreboot
>> Subject: Re: [coreboot] Serengeti dts
>>
>> On 29.10.2008 22:23, Myles Watson wrote:
>>     
>>> I'm running with a very minimalized dts (attached) to try to get to the
>>> point where a device gets matched correctly and disabled.  I think
>>>       
>> devices
>>     
>>> that should be disabled are causing me grief in SimNOW.
>>>
>>> This is a snippet of the log file that has me wondering what I'm doing
>>> wrong:
>>>
>>> PCI: pci_scan_bus pci_probe_dev returns dev 0x00000000(None (not found))
>>> PCI: devfn 0x8
>>> pci_scan_get_dev: list is 0x000ce8bc, *list is 0x00000000
>>> PCI: pci_scan_bus pci_scan_get_dev returns dev None (no dev in tree yet)
>>> new_device: devcnt 14
>>> find_device_operations: check all_device_operations[i] 0x0000d7a0
>>> find_device_operations: cons 0x0000d7a0, cons id PCI: 1022:0001
>>> find_device_operations: check all_device_operations[i] 0x0000d800
>>> find_device_operations: cons 0x0000d800, cons id APIC_CLUSTER: 1022:1100
>>> find_device_operations: check all_device_operations[i] 0x0000d860
>>> find_device_operations: cons 0x0000d860, cons id PCI: 1022:1100
>>> find_device_operations: check all_device_operations[i] 0x0000dc80
>>> find_device_operations: cons 0x0000dc80, cons id PCI: 1022:7460
>>> find_device_operations: check all_device_operations[i] 0x0000dc20
>>> find_device_operations: cons 0x0000dc20, cons id PCI: 1022:7462
>>> find_device_operations: match
>>> PCI: 01:01.0 id PCI: 1022:7462 ops
>>> PCI: 01:01.0 [PCI: 1022:7462] enabled
>>> PCI: pci_scan_bus pci_probe_dev returns dev 0x00012c70(dynamic PCI:
>>>       
>> 01:01.0)
>>     
>>> Not a multi function device, or the device is not present. Skip to next
>>> device.
>>>
>>> Even though there's a match, a new device got created (dynamic PCI:
>>>       
>> 01:01.0)
>>     
>>> Because of that, the enabled flag gets lost.
>>>
>>>       
>> You can't fix that in the dts. It's a code bug. I had a fix for the old
>> device tree code, but forward porting will takes some time. I hope to
>> create a working version over the weekend.
>>     
>
> I'd love to hear the general idea, even before I see the patch.  I'm
> surprised that you think the problem is in the device tree code.
>   

Scan your boot log for the string "error". Don't remember the
capitalization. Basically, we use the wrong device in the tree as basis
for the scan, so we get no matches at all.

I'll post my old patch.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/