[coreboot] port superiotool to FreeBSD
Andriy Gapon
avg at icyb.net.ua
Tue Oct 28 17:31:21 CET 2008
on 28/10/2008 17:56 Idwer Vollering said the following:
>
>
> 2008/10/28, Andriy Gapon <avg at icyb.net.ua <mailto:avg at icyb.net.ua>>:
>
>
> allow superiotool to compile and work on FreeBSD
> using the same approach as earlier flashrom port
>
> Signed-off-by: Andriy Gapon <avg at icyb.net.ua <mailto:avg at icyb.net.ua>>
>
> ---
>
> This is tested on FreeBSD 7, dump for W83977EF/EG that I sent previously
> was obtained using this patch.
>
> It seems that this approach can also be extended to all coreboot (and
> utils) code that uses inX/outX (it is quite unfortunate that Linux and
> BSD use different order of parameters for outX).
>
>
> --
>
> Andriy Gapon
>
> --
> coreboot mailing list: coreboot at coreboot.org
> <mailto:coreboot at coreboot.org>
> http://www.coreboot.org/mailman/listinfo/coreboot
>
>
> Great ! However, you overlooked outb at lines 471 and 475 in ite.c, see
> my patch.
>
> Idwer
>
Oops and thanks!
I did 'svn update' but forgot to 'gmake' after that.
--
Andriy Gapon
More information about the coreboot
mailing list