[coreboot] r3529 - trunk/coreboot-v2/targets/tyan/s2912_fam10

Arne Georg Gleditsch arne.gleditsch at numascale.com
Fri Oct 24 16:57:08 CEST 2008

Marc Jones <Marc.Jones at amd.com> writes:
> Arne Georg Gleditsch wrote:
>> Marc Jones <Marc.Jones at amd.com> writes:
>>> This was my fault. I missed reviewing the abuild config.
>>> This is now the same as serengeti_cheetah_fam10.
>>> A little background information. The fam10 initialization is a bit
>>> larger than the K8 code. To make more room in the same 512K ROM that
>>> most platforms have the normal image was dropped. The other change is
>>> the use of failover. This makes the XIP CAR code live in only one
>>> place instead of in the fallback and normal images.
>>> Arne, please test a s2912_fam10 abuild and ack this.
>> I'll do so.  However, once I start digging into this -- would it make
>> sense to fix it properly so that the target builds a full 1024K ROM (as
>> the board is equipped with) and actually includes both the normal and
>> failover image?
> Sure, That would be great.

Sorry about the delay, I was sidetracked by other stuff.  Here's a patch
towards r3690 upping the ROM size for the S2912 Fam10 target to 1M.
Both regular and abuild images have been boot tested successfully.  (Not
having a proper abuild infrastructure set up, the abuild image fails on
not having a real payload available, but otherwise looks correct.)

Signed-off-by: Arne Georg Gleditsch <arne.gleditsch at numascale.com>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: s2912_fam10_1024k_rom.diff
Type: text/x-diff
Size: 6675 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081024/2d3c867f/attachment.bin>

More information about the coreboot mailing list