[coreboot] patch: add routing debug print to v3

[Carl-Daniel Hailfinger]

On 20.10.2008 19:28, ron minnich wrote:
> attached.
>
> corrections and improvements welcome. Builds fine on serengeti. Not
> testing until we work around the vga issue.
>
>
> These changes add support for utility functions to dump routing. They 
> also add a mainboard.c for serengeti that will call them.
>   

Since it is in the mainboard directory, the name "mainboard.c" does not
convey any additional information. However, the name stage2.c would be
rather helpful. Your choice, though.


> Interesting note: adding a set of mainboard ops and mainboard.c for 
> mainboards is trivial: create file, add to makefile, add 
> property to mainboard dts, done. A good sign that we got something right. 
>   

Indeed.


> Index: northbridge/amd/k8/Makefile
> Add util.c to stage2 files.
>
> Index: northbridge/amd/k8/util.c
> Utility to print routing registers. 
>
> Index: mainboard/amd/serengeti/mainboard.c
> new mainboard.c -- currently, only use is that the phase6 init calls the 
> code to show all routing registers as a debug function, but it shows how to 
> use a stage2 mainboard file. 
>
> Index: mainboard/amd/serengeti/Makefile
> add mainboard.c to makefile. 
>
> Index: mainboard/amd/serengeti/dts
> add 	device_operations="serengeti";
> property, so we link in to mainboard device ops. 
>
> Index: include/arch/x86/amd/k8/k8.h
> k8.h: add defines for start and end of routing registers. 
>   

If you add your signoff, this is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/