[coreboot] Serengeti VGA

ron minnich rminnich at gmail.com
Mon Oct 20 21:41:37 CEST 2008

On Mon, Oct 20, 2008 at 12:38 PM, Myles Watson <mylesgw at gmail.com> wrote:
> I've been trying to make the configuration spaces match between v2 and v3.
> The biggest difference left is the disabled/hidden devices which are not
> hidden in v3.
> Any chance that's causing the problem?
> I've also been trying to figure out where the legacy IO space (e.g. 0x3d4)
> gets routed to the card.  Does this happen automatically because the VGA bit
> is set in the bridge?

legacy IO is the vga address range and the PC IO.

One of the config space registers should have ISA set.


More information about the coreboot mailing list