[coreboot] v2 and v3 pci differences
Myles Watson
mylesgw at gmail.com
Fri Oct 10 02:01:02 CEST 2008
> -----Original Message-----
> From: ron minnich [mailto:rminnich at gmail.com]
> Sent: Thursday, October 09, 2008 4:54 PM
> To: Myles Watson
> Cc: Coreboot
> Subject: Re: v2 and v3 pci differences
>
> On Thu, Oct 9, 2008 at 1:58 PM, Myles Watson <mylesgw at gmail.com> wrote:
> > Here are the major differences between v2 and v3 initializing serengeti
> > cheetah. The biggest problem is that the memory-mapped I/O ends up in
> the
> > wrong place (see the Display controller's ROM address)
>
> This one is easy:
>
> if ((dev->on_mainboard) && (dev->rom_address == 0)) {
> // Skip it if rom_address is not set in MB Config.lb.
> // TODO: No more Config.lb in coreboot-v3.
> return;
> }
>
>
>
> we have not done it yet.
>
> If anybody wants to get to this before I do, the help is appreciated.
> I think it needs a dtc fix.
>
> i.e. in a dts for a part,
> rom_address = "fff00000";
> and the dtc needs to know this is one of the special properties in the
> device struct.
>
I agree that needs to be done, but in this case the VGA card is not onboard.
I think the I/O mapping is wrong, which makes it so that when the signature
gets read it comes back 0xffff instead of 0xa5a5.
Thanks,
Myles
More information about the coreboot
mailing list