[coreboot] [PATCH] v3: move generic intel x86 init code to arch/x86/intel

[Carl-Daniel Hailfinger]

Move the generic intel x86 init code in arch/x86/stage0_i586.S to
arch/x86/intel/stage0.S to make it consistent with the other variants of
that code.
Clean up two superfluous rules from arch/x86/Makefile which were needed
before.

You need to run the following command in addition to the patch:
svn mv arch/x86/stage0_i586.S arch/x86/intel/stage0.S

Compile tested on all arches.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Index: corebootv3-arch_x86_cleanup/arch/x86/Makefile
===================================================================
--- corebootv3-arch_x86_cleanup/arch/x86/Makefile	(Revision 898)
+++ corebootv3-arch_x86_cleanup/arch/x86/Makefile	(Arbeitskopie)
@@ -112,7 +112,7 @@
 endif
 
 ifeq ($(CONFIG_CPU_I586),y)
-	STAGE0_CAR_OBJ = stage0_i586.o
+	STAGE0_CAR_OBJ = intel/stage0.o
 else
 ifeq ($(CONFIG_CPU_AMD_GEODELX),y)
 	STAGE0_CAR_OBJ = geodelx/stage0.o
@@ -243,15 +243,7 @@
 	$(Q)$(CC) $(INITCFLAGS) -c $< -o $@
 	
 # Building asm stub.
-$(obj)/arch/x86/stage0%.o: $(src)/arch/x86/stage0%.S
-	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
-		-o $(obj)/arch/x86/stage0_asm.s -DBOOTBLK=0x1f00 \
-		-DRESRVED=0xf0 -DDATE=\"`date +%Y/%m/%d`\"
-	$(Q)printf "  AS      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
-
-$(obj)/arch/x86/geodelx/stage0.o: $(src)/arch/x86/geodelx/stage0.S
+$(obj)/arch/x86/%/stage0.o: $(src)/arch/x86/%/stage0.S
 	$(Q)mkdir -p $(dir $@)
 	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@))\n"
 	$(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
@@ -260,18 +252,6 @@
 	$(Q)printf "  AS      $(subst $(shell pwd)/,,$(@))\n"
 	$(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
 
-
-# NOTE HACK. Stefan will fix this :-)
-$(obj)/arch/x86/amd/stage0.o: $(src)/arch/x86/amd/stage0.S
-	$(Q)mkdir -p $(dir $@)
-	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(CC) -E $(COREBOOTINCLUDE) $< \
-		-I $(src)/include/arch/x86/amd/k8 \
-		-o $(obj)/arch/x86/stage0_asm.s -DBOOTBLK=0x1f00 \
-		-DRESRVED=0xf0 -DDATE=\"`date +%Y/%m/%d`\"
-	$(Q)printf "  AS      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
-
 $(obj)/coreboot.initram $(obj)/coreboot.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(INITRAM_SRC)
 	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@)) (XIP)\n"
 	$(Q)$(CC) $(INITCFLAGS) -fPIE -c -combine $(COMBINEFLAGS) $(INITRAM_SRC) -o $(obj)/coreboot.initram_partiallylinked.o


-- 
http://www.hailfinger.org/