[coreboot] SeaBIOS and the Geode LX framebuffer
Jordan Crouse
jordan.crouse at amd.com
Mon Oct 6 16:35:15 CEST 2008
On 06/10/08 15:31 +0100, Stephen Crocker wrote:
> Carl-Daniel Hailfinger wrote:
> > On 03.10.2008 12:29, Stephen Crocker wrote:
> >> Is there a way of getting VGA support with SeaBIOS on the AMD Geode LX
> >> framebuffer? I have successfully built and tested a BIOS image that
> >> appears to boot into DOS but the lack of display means that it is of
> >> little use. Is there a VGA ROM image that I can include?
> >
> > You'd need a VGA emulation VSA and AFAIK that piece of software is not
> > available as open source due to an interesting rights situation.
>
> How much of this is handled in AMD's binary VSA module? I have been
> looking through both the AMD and OpenVSA source and it looks as if the
> lxvg module is supposed to handle VGA SMIs but I cannot find where this
> is actually done.
None of it - the VGA is actually a seperate component under difference
licensing. Thats why you don't see it in the VSA code.
> Incidentally, I have noticed that the AMD VSA source available from
> dev.laptop.org cannot be used to build an image with CS5536 support. Is
> this an old version and, if so, is newer source available?
Umm...
http://dev.laptop.org/git?p=geode-vsa;a=blob;f=sysmgr/cs5536.c;h=422922cab808fa8ca529726c2ab43e76b4289406;hb=HEAD
Jordan
--
Jordan Crouse
Systems Software Development Engineer
Advanced Micro Devices, Inc.
More information about the coreboot
mailing list