[coreboot] [PATCH] Athlon64 K8 fixes
ron minnich
rminnich at gmail.com
Thu Nov 20 00:32:26 CET 2008
On Wed, Nov 19, 2008 at 3:01 PM, Robert Millan <rmh at aybabtu.com> wrote:
>
> Hi,
>
> My Athlon64 / K8 socket 939 setup needed the following adjustments to fix
> memory read/write errors. Thanks to Rudolf for hinting on which bits I
> should check for. Details:
>
> - bit 9, mandated by spec to always be set on sodimm or socket 939 dual
> dimm.
>
> - bit 28, enable 2T timing. no idea why, but I get memory errors without
> it.
>
> - bit 29, upper chip select. mandated by spec on socket 939.
>
> My patch also adds missing descriptions, based on the ones from the spec
> (http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.pdf)
>
Given that these settings are mainboard and socket dependent, we need
a way to do these settings that takes those factors into account.
It seems to me that setting 2T on very athlon64 platform is not the
way to do it.
Thanks for finding this and getting us this initial patch. Do you
think you can extend it in some way so we don't slow down all k8
platforms?
thanks
ron
More information about the coreboot
mailing list