[coreboot] r252 - in buildrom-devel: config/platforms packages/filo/conf

[svn at coreboot.org]

Author: mjones
Date: 2008-11-11 22:16:21 +0100 (Tue, 11 Nov 2008)
New Revision: 252

Removed:
   buildrom-devel/packages/filo/conf/dbm690t-Config
Modified:
   buildrom-devel/config/platforms/dbm690t.conf
Log:
We don't need to save the dbm690t filo config file for the new version of filo. (trivial)

Signed-off-by: Marc Jones <marcj303 at yahoo.com>
Acked-by: Marc Jones <marcj303 at yahoo.com>

Modified: buildrom-devel/config/platforms/dbm690t.conf
===================================================================
--- buildrom-devel/config/platforms/dbm690t.conf	2008-10-29 15:55:16 UTC (rev 251)
+++ buildrom-devel/config/platforms/dbm690t.conf	2008-11-11 21:16:21 UTC (rev 252)
@@ -54,10 +54,6 @@
 # Tell construct-rom.sh to pad the ROM to a power of 2
 PLATFORM_DOPAD := -p
 
-# FILO configuration
-
-FILO_CONFIG=dbm690t-Config
-
 # VIDEO BIOS configuration
 
 ifeq ($(CONFIG_AMD_R690_CUSTOM_VBIOS),y)

Deleted: buildrom-devel/packages/filo/conf/dbm690t-Config
===================================================================
--- buildrom-devel/packages/filo/conf/dbm690t-Config	2008-10-29 15:55:16 UTC (rev 251)
+++ buildrom-devel/packages/filo/conf/dbm690t-Config	2008-11-11 21:16:21 UTC (rev 252)
@@ -1,102 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-# SATA
-# MENULST_FILE = "hda1:/boot/filo/menu.lst"
-# PATA
-MENULST_FILE = "hde1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 3
-
-# Image filename for automatic boot and optional command line parameter
-#AUTOBOOT_FILE = "hde1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-# USB_DISK = 1
-
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-