[coreboot] Coreboot on Tyan S2892

Myles Watson mylesgw at gmail.com
Fri Nov 7 23:29:56 CET 2008

> > > SATA devices should be in legacy mode and filo should be able to load
> your
> > > kernel. The only challenge is getting the drive numbering lined up.
> > > in buildrom do a make filo-config. You also need a grub like menu.lst
> on
> > > the drive.
> >
> > I thought there was no legacy mode because it's Nvidia's CK804.  If
> there is
> > I went through a lot of pain for nothing (except learning of course :)
> Ah, it would be a controller limitation not a filo one. Sorry. I didn't
> mean to confuse the issue.

No problem.  I should have been clearer in the original response.  You
probably helped clarify it for everyone else.


More information about the coreboot mailing list