[coreboot] HT revision 1.02 in K8
Marc.Jones at amd.com
Mon Nov 3 22:21:31 CET 2008
Carl-Daniel Hailfinger wrote:
> Hi Marc,
> maybe you can shed some light on the problem below.
> Basically, the K8 reports in lspci that it supports HT 1.02, but the
> BKDG says it uses HT 1.03. And HT 1.03 is the first publicly available spec.
I am not sure why you are blowing this out of proportion. It is a
warning. It isn't a problem. If you examine the freely available K8
BKDG, you will find that registers in the K8 match the 1.03 revision of
the spec. Thus, the settings read by lspci are decoded correctly.
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
More information about the coreboot