[coreboot] Booting Geode LX processor autonomously
llandre
r&d2 at dave-tech.it
Wed May 21 12:08:16 CEST 2008
I'm working with the LPC dongle by Artec to emulate boot flash. It works
fine when controlling the processor via JTAG. That is when we debug the
boot code under the JTAG control everything is ok (irq13=1 to stop the
processor boot).
When I disconnect the JTAG debugger and set irq13 to 0 to let the
processor to boot from the LPC dongle flash, it does not boot. Do I need
to perform other operations to let it boot autonomously?
TIA,
llandre
DAVE Electronics System House - R&D Department
web: http://www.dave.eu
email: r&d2 at dave-tech.it
More information about the coreboot
mailing list