[coreboot] epia-cn patch

bari bari at onelabs.com
Fri May 16 21:43:37 CEST 2008


ron minnich wrote:
> Aaron, thanks very much for this fine work!
>
> I am wondering what a good mainboard for this chipset is. Any recommendations?
>
> Thanks again, we've really been hoping to get the -cn into coreboot.
>
> ron
>
>   
Aaron's coreboot port is for the epia-cn and uses: C7 + CN700 + VT8237R 
Plus + VT1211

VIA EPIA CN13000G
VIA EPIA CN10000EG
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=400

Other epia boards that use the C7 or C7D + CN700 + VT8237R Plus and are 
compatible with the epia-cn patch with only changes to raminit.c:

VIA EPIA LN10000EG
VIA EPIA LN10000EAG (no TV-out)
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=473

VIA NAB 7400
VIA NAB 7410
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=590

PC2500E
http://www.via.com.tw/en/initiatives/empowered/pc2500_platform/index.jsp

http://www.clubit.com/product_detail.cfm?itemno=A4842001
$59.99 !

VIA VB7001G
VIA VB7001AG (no TV-out)
http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=490

There are also several Jetway boards that use the same chipset except 
for the VIA VT1211 super io. The Jetway boards tend to use the Fintek 
F71805F/FG super io that Corey has a patch for.
http://www.jetway.com.tw/jw/ipcboard_socket.asp?platid=16

-Bari





More information about the coreboot mailing list