[coreboot] legacy bios support and coreboot

Corey Osgood corey.osgood at gmail.com
Thu May 8 08:18:44 CEST 2008

Can I get a copy of both of your trees, and I'll try to get it working
again? I've got the next couple days off, and I should be working on my
project car, but I supposed I can take a break for a little coreboot. My
last rendition before I lost everything had both IDE and SATA working, and
before that I had them working individually, but not both at once.


On Thu, May 8, 2008 at 2:08 AM, bari <bari at onelabs.com> wrote:

> Your auto.c includes:
> #include "southbridge/via/vt8237r/vt8237r_early_serial.c"
> this is not in the current tree.  Please send a copy of this file.
> Regards,
> Bari
> aaron lwe wrote:
> >>  Do you have a working version of coreboot for the epia-cn?
> >>
> >
> > I attached the auto.c for epia-cn, the northbridge cn700 and
> > southbridge vt8237r code are all available at svn src tree. note that
> > for cn700 dram enable, the value for enable dll should be 0x120000,
> > default ocd calibration should be 0x121c20 and exit calibration mode
> > should be 0x120020. These values worked for me. If you still have
> > problem with dram init, you should also change the values of D0F2 to
> > be the same with your factory bios'.
> >
> > The serial code is from vt8235.
> >
> > I cannot make sata work with filo(not sure what's the problem), so I
> > disabled sata in auto.c.
> >
> > Thanks
> >
> --
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080508/b1755278/attachment.html>

More information about the coreboot mailing list