[coreboot] [PATCH] artecgroup/dbe62: Route ethernet adapter IRQ correctly and reduce interrupt contention problems by using different IRQs for all the interrupt lines

ron minnich rminnich at gmail.com
Mon May 5 19:17:34 CEST 2008


On Mon, May 5, 2008 at 10:06 AM, Marc Jones <Marc.Jones at amd.com> wrote:

>
> I understand that you are addressing a problem but I have to disagree that
> the 5536 USB controllers shouldn't be in the PIR table. Even if you change
> the internal devices IRQs you should still put them in the table.

I think you are right as usual. I'm wrong.

> For your specific problems; Do you have a USB device plugged in? If not
> there should be little to no activity from USB. How can that be the problem?
> Since you do have a problem with that mainboard and card, I think that any
> changes you make should be only for that mainboard.


agree.

The real issue anyway is that ISDN driver, I just can't stand to look at it :-)
But I have to.

ron




More information about the coreboot mailing list