[coreboot] .. Re: .. Re: Via epia
jtd at mtnl.net.in
Mon Mar 24 06:24:27 CET 2008
On Sunday 23 March 2008 03:53 am, Jacek Chruscik wrote:
> your config.lb points at
> chip superio/ite/it8705f
> can you verify if this is actually what you have on your board?
yes. It is it8705f. verified by reading the chip marking and
> My epia has vt1211 for example.
> There's not much set-up needed to initialise serial port, and it's
> rather straight forward.
> did you try to actually write it to flash and boot up,
yes. wrote the chip and verified correctly. Then booted.
> or just under qemu?
Tried qemu after that as there was no serial output.
The serial port is working correctly with the null modem.
More information about the coreboot