[coreboot] qemu v3 etherboot

[Bios]

Yesterday I start v3 on qemu. As payload i used etherboot 5.4.3, it
worked fine.
http://rom-o-matic.net/5.4.3/build.php?version=5.4.3&F=&arch=i386&nic=ns8390%3Artl8029+--+%5B0x10ec%2C0x8029%5D&ofmt=ELF+%28LinuxBIOS%29+ROM+Image+%28.elf%29&A=Configure

The only trouble is Lar. There the output:
---
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
initialized 1 dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1
have_resources 1 initialized 1 dynamic PCI: 00:01.1(PCI: 00:01.1):
enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.3(PCI:
00:01.3): enabled 1 have_resources 1 initialized 1 dynamic PCI:
00:02.0(PCI: 00:02.0): enabled 1 have_resources 1 initialized 1 dynamic
PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1 initialized 1
Stage2 code done. LAR: Attempting to open 'normal/payload'.
LAR: Start 0xfffe0000 len 0x20000
LAR: seen member normal/option_table
LAR: seen member normal/initram/segment0
LAR: seen member normal/stage2/segment0
LAR: seen member normal/stage2/segment1
LAR: seen member normal/stage2/segment2
LAR: seen member normal/payload/segment0
LAR: seen member bootblock
LAR: File not found!
LAR: Attempting to open 'normal/payload/segment0'.
LAR: Start 0xfffe0000 len 0x20000
LAR: seen member normal/option_table
LAR: seen member normal/initram/segment0
LAR: seen member normal/stage2/segment0
LAR: seen member normal/stage2/segment1
LAR: seen member normal/stage2/segment2
LAR: seen member normal/payload/segment0
LAR: CHECK normal/payload/segment0 @ 0xfffe8850
start 0xfffe88a0 len 24320 reallen 24320 compression 0 entry 0x000100b0
loadaddress 0x00010000 LAR: Compression algorithm #0 (none) used
LAR: Attempting to open 'normal/payload/segment1'.
LAR: Start 0xfffe0000 len 0x20000
LAR: seen member normal/option_table
LAR: seen member normal/initram/segment0
LAR: seen member normal/stage2/segment0
LAR: seen member normal/stage2/segment1
LAR: seen member normal/stage2/segment2
LAR: seen member normal/payload/segment0
LAR: seen member bootblock
LAR: File not found!
LAR: load_file: No such file 'normal/payload/segment1'
LAR: load_file_segments: All loaded, entry 0x000100b0
CPU 1338 Mhz
Etherboot 5.4.3 (GPL) http://etherboot.org
---

How can i solve this?

Regards
Markus