[coreboot] PCI settings on EPIA-ME6000

[Klaus Stammermann]

Hi there

I try to config coreboot to use it on VIA EPIA-ME6000 with onboard vga.
Therefore I changed Config.lb in src path.

Here output of lspci:

00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)

Here my diff on Config.lb and Options.lb:
Index: Options.lb
===================================================================
--- Options.lb	(Revision 3086)
+++ Options.lb	(Arbeitskopie)
@@ -52,7 +52,7 @@
 ### Build options
 ###
 default CONFIG_PCI_ROM_RUN=0
-default CONFIG_CONSOLE_VGA=0
+default CONFIG_CONSOLE_VGA=1

 ##
 ## Build code for the fallback boot
Index: Config.lb
===================================================================
--- Config.lb	(Revision 3086)
+++ Config.lb	(Arbeitskopie)
@@ -181,10 +181,18 @@
 			device pci 12.0 on end  # Ethernet
 		end
 #		This is on the EPIA MII, not the M.
-		chip southbridge/ricoh/rl5c476
-			register "enable_cf" = "1"
-			device pci 0a.0 on end
-			device pci 0a.1 on end
-		end
+#		chip southbridge/ricoh/rl5c476
+#			register "enable_cf" = "1"
+#			device pci 0a.0 on end
+#			device pci 0a.1 on end
+#		end
 	end
+	device pci_domain 1 on
+		device pci 0.0 on  # PCI
+			chip drivers/pci/onboard
+				device pci 0.0 on end
+				register "rom_address" = "0xfffc0000" #256k image
+			end
+        	end
+	end
 end


Please look at this config. Is it possible to use onboard vga with these
parameters?

Klaus