[coreboot] FILO loads image but, Linux doesnt boot

[Phani Babu Giddi]

Hi Ron,

The Geode frame buffer driver is turned on the .config file SLES 10 SP1
kernel that I have and I am not sure why I cannot see anything on the
screen.

One more thing in the Config.lb file for db800, the pci device id
corresponding to this device has been turned off does that make a
difference. I thought this should be set only when VGA ROM is present
and CONFIG_CONSOLE_VGA and CONFIG_PCI_ROM_RUN is set ?
Regards,
Phani
On Wed, Mar 5, 2008 at 6:03 PM, ron minnich <rminnich at gmail.com> wrote:

> On Wed, Mar 5, 2008 at 5:50 PM, Peter Stuge <peter at stuge.se> wrote:
> > On Wed, Mar 05, 2008 at 05:47:27PM -0800, Phani Babu Giddi wrote:
> >  > Let me recheck if the geodelx frame buffer is already patched or
> >  > not. I think it was patched because X was working for with the
> >  > commerial BIOS.
> >
> >  X could be using the VESA driver. There is also an Xorg driver for
> >  the geodelx. Neither depend on kernel framebuffer.
>
>
> can someone remind me:do we need a special VSA to make the Linux geode
> lx framebuffer driver work?
>
> Phani, do you want my .config that works with linux and brings up the
> frame buffer? it is for 2.6.24.2
>
> ron
>
> --
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080306/de7f766c/attachment.html>