[coreboot] filo: Skip native ATA controllers in find_ide_controller_compat()

Corey Osgood corey.osgood at gmail.com
Sun Jun 22 03:54:34 CEST 2008

Anyone want to try with an IDE controller in native mode? I know
vt8237r can handle it, shouldn't this make it so FILO can figure it


On Sat, Jun 21, 2008 at 8:17 PM, Kevin O'Connor <kevin at koconnor.net> wrote:
> On Sat, Jun 21, 2008 at 08:06:50AM +0200, Peter Stuge wrote:
>> On Fri, Jun 20, 2008 at 11:55:54PM -0500, bari wrote:
>> > Peter Stuge wrote:
>> > > Found a bug in the debug() calls. Fixed in the attached version.
>> >
>> > It works!
>> Great! I'm looking forward to more test results. Here's a properly
>> signed-off patch with some small debug message fixes and better
>> explanation.
>> Anyone else who has a board with a SATA PCI device before the
>> PATA/IDE device, please test booting from PATA using this patch.
>> It would also be interesting to boot this patch on a board with only
>> PATA/IDE devices - ie. no SATA or native mode PATA.
> I can confirm that my epia-m continues to boot with a patched filo.
> The epia-m has only PATA, and it is in compatibility mode.
> -Kevin
> --
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot

More information about the coreboot mailing list