[coreboot] Newbee patch for A49LF040A (Alix2c2) please have a look.
c-d.hailfinger.devel.2006 at gmx.net
Fri Jun 6 21:28:15 CEST 2008
On 06.06.2008 20:50, Jens Kuehnel wrote:
> Hi coreboot list,
> I visited the coreboot/flashrom talk during linuxtag, and was really
I remember... you were the one who brought hardware to the workshop.
> impressed how "easy" it is can help/to hack. My target is to let
> coreboot run on my alix2c2 (the one with only 2 network cards).
> The advantage for me is, its similar to an existing target (not too
> hard), but far enough to learn something.
> My first problem it that flashrom does not support my flashchip.
> But I hope I can fix this. :-) Patch attached.
Thanks for the patch. Unfortunately it seems your mailer wrapped the
patch. Thunderbird users either
- have to attach the patch or
- select HTML composition, then choose "Preformat", then paste the patch
and then send it and confirm converting the mail to plain text.
> But before I break my flash. Is it possible to destroy the chip, by
> using the wrong method?
In theory, this should not happen. In practice, old or extremely cheap
flash chips can have sticky bits after a few erase cycles. I think the
risk for your board is almost zero.
> The chip is a AMIC A49LF040A. It look like a SST 49LF040 replacement, I
> found the IDs @ http://www.amictechnology.com/pdf/A49LF040A.pdf.
> I have a "LPC.1A", which means I can recover from bad flashes. But I
> don't like to solder SMD.
> Can someone with more experience look over it, before I test it? Thanks
> a lot!
I'd like to do that, but the patch was so mangled that I had problems
reading it. It looks like you put vendor and device ID together in
AMIC_A49LF040A. The vendor ID you want is probably AMIC_ID_NOPREFIX.
> Greetings from Frankfurt/M (Germany)
Greetings from Tuebingen (same country)
More information about the coreboot