[coreboot] SeaBIOS debug output

ron minnich rminnich at gmail.com
Sun Jul 20 22:57:45 CEST 2008

On Wed, Jul 16, 2008 at 6:47 PM, Kevin O'Connor <kevin at koconnor.net> wrote:
> Hi Myles,
> On Wed, Jul 16, 2008 at 07:29:29PM -0600, Myles Watson wrote:
>> > Finding the option roms is easy - they are located between 0xc0000 and
>> > 0xe0000 and are 2KiB aligned.
>> That can be true after Coreboot copies them there.  Devices which have
>> option ROMs on the card are located somewhere in the PCI address space until
>> they are copied.  On-board devices have their option ROMs contained
>> somewhere in the BIOS chip.
> Right.  I'm a proponent of having coreboot be responsible for copying
> the option roms to their locations in ram.  Once coreboot loads the
> option roms then seabios can easily locate and run them.

you're assuming they would all fit at one time into 64k. Not
necessarily the case. What has to happen is copy (or map) the rom, run
it, remove it, and so on. At least that's how I remember it working.
It was easier in the emulator as the copy step is not needed.

Whatever happens with this discussion, we still need to be able to run
with things like linux as payload and seabios not there. At linuxworld
next month, at least one booth will be showing Intel's rapidboot,
which we all know as linux-as-booloader.

intel is showing that linux can be used as a bootloader. I wish they'd
gotten the memo 10 years ago but better late than never.


More information about the coreboot mailing list