[coreboot] i82801xx nic problems.

Corey Osgood corey.osgood at gmail.com
Thu Jan 31 23:52:26 CET 2008


Use awarddeco. afaik the site is down, but it must be mirrored somewhere.

On 1/31/08, joe at smittys.pointclark.net <joe at smittys.pointclark.net> wrote:
> Quoting joe at smittys.pointclark.net:
>
> > Quoting Peter Stuge <peter at stuge.se>:
> >
> >> On Wed, Jan 30, 2008 at 09:50:08AM -0500, joe at smittys.pointclark.net
> wrote:
> >>> device pci 1e.0 on # PCI bridge: Intel Corporation 82801 PCI Bridge
> >>> chip drivers/pci/onboard
> >>> device pci 08.0 on end # Intel Corporation 82801DB PRO/100 VE Ethernet
> >>>
> >>> do_pci_scan_bridge for PCI: 00:1e.0
> >>> PCI: pci_scan_bus for bus 01
> >>> PCI: devfn 0x38, bad id 0xffffffff
> >>> Disabling static device: PCI: 01:08.0
> >>
> >> It was mentioned a while ago that the PCI ids in debug output is
> >> offset by one from the config ids. I don't know for sure, but it's
> >> worth investigating.
> >>
> >>
> >> //Peter
> >>
> > Hmm the correct device id is listed in pci_ids.h, is that what you mean?
> > I have a feeling that the nic is not powering on. With the original
> > bios the lights on the nic come on about 3 seconds after power up.
> > With coreboot there are no lights at all. I wonder if there is a
> > register switch to turn it on???? I'm stumped.....I wonder if the guys
> > at etherboot could help me???
> >
> >
> How would do a dump of the nics eeprom in Linux? I'm thinking this is
> where the problem is coming from???
>
> Thanks - Joe
>




More information about the coreboot mailing list