[coreboot] Checking support for Anaheim2A motherboard

[Ken Chiang]

Hello,
I new to the list and would like to contribute to this
project if possible.  To get things started, I am
wondering if the motherboard specified below is
currently supported?

Thanks!

================specs==================
CPU:  Intel Celeron 533Mhz
northbridge: Intel 82810
southbridge: Intel 82801AA
mainboard: Anaheim2A
BIOs chip: ANA 2A (EM) v.1.03

lspci output:
00:00.0 Host bridge: Intel Corporation 82810 GMCH
[Graphics Memory Controller Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corporation
82810 CGC [Chipset Graphics Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI
Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA
Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801AA IDE
(rev 02)
00:1f.2 USB Controller: Intel Corporation 82801AA USB
(rev 02)
00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev
02)
01:09.0 Multimedia audio controller: Cirrus Logic
Crystal CS4281 PCI Audio (rev 01)
01:0b.0 Ethernet controller: D-Link System Inc RTL8139
Ethernet (rev 10)
01:0d.0 USB Controller: NEC Corporation USB (rev 41)
01:0d.1 USB Controller: NEC Corporation USB (rev 41)
01:0d.2 USB Controller: NEC Corporation USB 2.0 (rev
02)
01:0e.0 Communication controller: Conexant HSF 56k
Data/Fax Modem (rev 01)

superio chip:  model number on actual chip  ITE
IT8702F-A
superiotool output:
superiotool r
Found ITE IT8702F (id=0x8702, rev=0x3) at 0x2e
No dump available for this Super I/O

Type of BIOS device: soldered PLCC



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping