[coreboot] flashrom: Handling of mainboard selection

[Mart Raudsepp]

Ühel kenal päeval, T, 2008-02-19 kell 09:10, kirjutas Ward Vandewege:
> We talked on IRC about using the MAC address of the nic as another piece of
> information that could be used by flashrom. With that, the OLPC would not be
> detected; the vendor part of the MAC address would not match.

Maybe the NICs subsystem vendor ID could be used somewhat too. Some
ethernet chips allow setting the PCI subsystem vendor and device ID in
the EEPROM - is that a proper place to put Artec Group ID in in the
first place? Then it would be a simple matter of listing the subsystem
IDs for the network card to uniquely identify the board.


Regards,
Mart Raudsepp
Artec Design LLC