[coreboot] LBv2: asus A8NE - Filling 2 pci slots --> no VGA/boot

Peter Stuge peter at stuge.se
Mon Feb 11 01:55:01 CET 2008


On Sun, Feb 10, 2008 at 03:43:25PM -0800, Baski wrote:
> rom address for PCI: 01:06.0 = f4080000
> PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x0144
> PCI ROM Image, Vendor 5333, Device 8a01,
> PCI ROM Image,  Class Code 000003, Code Type 00
> Class Code mismatch ROM 00000003, dev 00030000
> copying non-VGA ROM Image from 0xf4080000 to 0xd0000, 0x8000 bytes

This is an S3 Virge graphics card.

Could you try with a different graphics card too?


> entering emulator
> un-inited int vector
> halt_sys: file /home/gurpreet/Desktop/coreboot-v2-3100/src/devices/emulator/x86emu/ops.c, line 4387

And while un-inited int vector means that some int call in the ROM
was unsuccessful the ROM seems to exit as it should.


> PCI: 01:07.0 init
> rom address for PCI: 01:07.0 = f4000000
> PCI Expansion ROM, signature 0xaa55, INIT size 0xc000, data ptr 0x0038
> PCI ROM Image, Vendor 1095, Device 0680,
> PCI ROM Image,  Class Code 010400, Code Type 00
> copying non-VGA ROM Image from 0xf4000000 to 0xd8000, 0xc000 bytes
> entering emulator

Here coreboot tries to execute also the ROM on the Silicon Image
PCI0680 ATA-133 controller, and if this is the last output you get
on serial, it fails.


Removing the ATA card really doesn't change anything?


//Peter




More information about the coreboot mailing list