[coreboot] v3 for alix: add ide support
Marc Jones
Marc.Jones at AMD.com
Thu Feb 7 20:16:53 CET 2008
ron minnich wrote:
> This code now lets filo find IDE.
>
> but it locks up :-(
>
> oh well. attached.
>
> ron
>
I preferred the v2 way of doing this. If the AMD IDE device was found it
got initialized. I think it needs a DTS and I think other southbridges
with multiple PCI headers will need this too.
Back to the 5536, You can have either NAND or IDE PCI header so the
enable_ide flag is redundant. If there is a PCI IDE card all of it's
memory and I/O will be set in the PCI BAR. They can't use the legacy
range so there is no real reason to not init the AMD IDE. If you wanted
to make the AMD IDE go away it would be better to remove it via
unwanted_vpci.
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list