[coreboot] VIA EPIA CN100000 is finally Working all.

urbez at linuxupc.upc.edu urbez at linuxupc.upc.edu
Mon Feb 4 14:08:50 CET 2008

Sorry :))) i have read this and yes, after the wrmsr, must have a }
problem with cut and paste to the email , the 80 character console :)

if (!(msr.lo & 0x10000)) {msr.lo|=0x10000;wrmsr(MSR_IA32_MISC_ENABLE,msr);}

And it works with C7 cpu, and uses the minimum voltage that accepts your CPU
and the maximum Speed Multiplier of your CPU.
I'm not sure if works on another CPU.

Mmm, i must download the last svn, for compare with that i have, with a diff.
Is different the auto.c, that i use, i cray for fit into the ROM_SIZE.
Initially i have working with a separate v8237 driver copied from another via
, but, finally, if i remember i use the entire v8237r version of Rudolf Marek.
I confirm that, when i can generate the pach for epia-cn, i'm at work :)

The CF8, is a missed parameter that i use in another program.
I use normally another PCI routines, i not remember why. I cray, for pass the
size as a parameter, better, if you use tables.
Ignore the CF8, and cut it :)

It is possible that your mainboard, starts with diferent parameters in the
bridge that not afect mine?

But wait for the DIFF results with the last version of SVN, to confirm if are
more easy the problem, and i can have forgotten extra changes.

This message was sent using IMP, the Internet Messaging Program.

More information about the coreboot mailing list