[coreboot] Asus M2A-VM

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Mon Dec 29 04:11:17 CET 2008


On 23.12.2008 14:54, Carl-Daniel Hailfinger wrote:
> On 23.12.2008 04:51, Carl-Daniel Hailfinger wrote:
>   
>> On 17.12.2008 04:39, Carl-Daniel Hailfinger wrote:
>>   
>>     
>>> Hi all,
>>>
>>> my Asus M2A-VM (690G/SB600) is working and boots to memtest and FILO.
>>>   
>>>     
>>>       
>> New status:
>> Working:
>> - memtest86 works for 2 GB RAM
>> - FILO works and loads a Linux kernel
>> - Linux boots
>> - SATA disks work under Linux
>> - Network works under Linux
>> - Power button works
>> - Software poweroff works
>>   
>>     
> - VGA text mode over D-Sub connector and over DVI connector (no idea
> whether that's the digital or analog variant) works fine. Somehow Linux
> does not want to activate the VESA framebuffer console.
>
>   
>> Untested:
>> - USB (later)
>> - SeaBIOS
>> Probably not working, must retest:
>> - 4 GB RAM
>> Not working:
>> - SATA multicount transfers (detected as unsupported by Linux)
>> - Powernow ("invalid freq entries 1000000 kHz vs. 800000 kHz")
>>     

Boot log attached.


Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: minicom_2008-12-29T040646.cap
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081229/88c5c10e/attachment.ksh>


More information about the coreboot mailing list