[coreboot] AMD DBM690T PowerNow table problems
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Mon Dec 29 04:06:10 CET 2008
Hi,
I get this message during boot on my socket AM2 system (Asus M2A-VM)
with the AMD DBM690T target:
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu
cores) (version
2.20.00)
powernow-k8: invalid freq entries 1800000 kHz vs. 800000
kHz
powernow-k8: invalid freq entries 1000000 kHz vs. 800000
kHz
powernow-k8: invalid
powernow_table
(CPUFreq not
supported)
The following files are attached:
- coreboot acpidump
- SSDT from proprietary BIOS
- _PSS created by genpowernow.c (from Rudolf) for my CPU
I appreciate any insights.
--
http://www.hailfinger.org/
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: acpidump_coreboot.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081229/892a8da4/attachment.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SSDT_proprietary.dsl
Type: text/x-dsl
Size: 2023 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081229/892a8da4/attachment.dsl>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: genpowernow_result.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081229/892a8da4/attachment-0001.txt>
More information about the coreboot
mailing list