[coreboot] Asus M2A-VM

Bao, Zheng Zheng.Bao at amd.com
Thu Dec 18 06:18:11 CET 2008

I traced back coreboot_table.c. 

I replace the add_mainboard_resources() with it used to be, that is,
lb_add_memory_range(). Then the e820 is right and SATA DMA also works .
I really don't know why it happens. I will keep dig it. If you guys have
any idea, please let us know.


-----Original Message-----
From: coreboot-bounces at coreboot.org
[mailto:coreboot-bounces at coreboot.org] On Behalf Of Carl-Daniel
Sent: Thursday, December 18, 2008 12:02 AM
To: Coreboot
Subject: Re: [coreboot] Asus M2A-VM

On 17.12.2008 16:11, Peter Stuge wrote:
> Carl-Daniel Hailfinger wrote:
>> my Asus M2A-VM (690G/SB600) is working and boots to memtest and FILO.
> Nice progress! Looking forward to hearing more.

The kernel hangs on SATA detection. That's expected, though, because
SATA setup is incomplete (only first port) and does not take care of
quirks of early revisions. I have a patch to set up all 4 SATA ports,
but the quirk fixups still need to be implemented.
And I'm hitting slightly unexpected behaviour during SATA PHY setup.
I'll give more info once I have access to my logs again.



coreboot mailing list: coreboot at coreboot.org

More information about the coreboot mailing list