[coreboot] testing patch and output

FENG Yu Ning fengyuning1984 at gmail.com
Sun Dec 7 19:34:09 CET 2008

On Mon, Dec 8, 2008 at 2:29 AM, FENG Yu Ning <fengyuning1984 at gmail.com> wrote:
> Comment on the above output:
>  Despite the "TEST FAILED!" warning, the testing is actually successful, for -
>  1. The command '0x01'(WRSR) is executed. It is in the existing
>     opmenu(see 0x5c in the well formatted ICH SPI registers) but not
>     in the hardcoded O_ST_M25P.
>  2. The control register for the ready-to-go WRSR command is
>     assembled correctly with the atomic bit and the index of its
>     required preop EWSR set. See the 2nd "SPIC before going".

Should be the 3rd one(0x406c).

More information about the coreboot mailing list