[coreboot] r3529 - trunk/coreboot-v2/targets/tyan/s2912_fam10

Stefan Reinauer stepan at coresystems.de
Fri Aug 22 14:00:33 CEST 2008

Arne Georg Gleditsch wrote:
> Marc Jones <Marc.Jones at amd.com> writes:
>> This was my fault. I missed reviewing the abuild config.
>> This is now the same as serengeti_cheetah_fam10.
>> A little background information. The fam10 initialization is a bit
>> larger than the K8 code. To make more room in the same 512K ROM that
>> most platforms have the normal image was dropped. The other change is
>> the use of failover. This makes the XIP CAR code live in only one
>> place instead of in the fallback and normal images.
>> Arne, please test a s2912_fam10 abuild and ack this.
> I'll do so.  However, once I start digging into this -- would it make
> sense to fix it properly so that the target builds a full 1024K ROM (as
> the board is equipped with) and actually includes both the normal and
> failover image?
The image resulting from abuild should work on real hardware.  If the
board comes with 1024K rom, choosing that size is a good idea.

coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

More information about the coreboot mailing list