[coreboot] [PATCH] artecgroup/dbe62: Fix SPD_NUM_COLUMNS value (DIMM page size)

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Tue Aug 12 22:07:04 CEST 2008

On 12.08.2008 21:53, Mart Raudsepp wrote:
> artecgroup/dbe62: Fix SPD_NUM_COLUMNS value (DIMM page size)
> This changes SPD_NUM_COLUMNS from 0x8 back to 0xa, as it was originally when
> copied over from another board, because 0x8 evaluates to 2kB, not 8kB, while 0xa
> does the latter. 8kB is what the chip has and what is also set in our currently
> used firmwares for DBE62.
> This (combined with all the previous committed hard work from Ron before) fixes
> memtest86+ freezes and hard reboots for me in quick 30 minute testing time,
> while before it would freeze or reboot just into 50% of first test.
> There is more to do to get the optimum RAM setup, but this should do for now -
> the rest is just optimizing to quicker timings, while current ones in the fake
> SPD are very conservative.
> Signed-off-by: Mart Raudsepp <mart.raudsepp at artecdesign.ee>

Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>



More information about the coreboot mailing list