[coreboot] TV-Out Plan - need suggestions

[Corey Osgood]

Erm, is the tv-out part of the onboard video, or is it a separate chip? I
thought it was a separate chip, so it wouldn't go in with the i830 stuff (in
case someone else has tv out with another board and a different chip). But
if it's onboard, just ignore me.

-Corey

On Sat, Apr 19, 2008 at 8:51 PM, Joe <joe at settoplinux.org> wrote:

> That's what I was thinking Peter, I'll have to look into this further.
> Just
> think, this will be the first coreboot board with TV-out that will not
> depend on any outside drivers :-)
>
> Although there are Linux drivers that could be used to change the settings
> once in Linux (overscan, etc).
>
> Thanks,
> Joseph Smith
> Set-Top-Linux
> www.settoplinux.org
> > -----Original Message-----
> > From: coreboot-bounces at coreboot.org [mailto:
> coreboot-bounces at coreboot.org]
> > On Behalf Of Peter Stuge
> > Sent: Saturday, April 19, 2008 1:42 PM
> > To: Coreboot
> > Subject: Re: [coreboot] TV-Out Plan - need suggestions
> >
> > On Fri, Apr 18, 2008 at 05:50:15PM -0400, Corey Osgood wrote:
> > > > > 2. Then setup a init (that would program the registers, and fire
> > > > > it up for the Tv encoder coreboot-v2/src/drivers/tv-out which
> > > > > could also be called from the nothbridge vga.c.
> > >
> > > Again, do this inside mainboard.c, so any other systems that might
> > > use i830 don't get tv init interfering with anything else.
> >
> > Please make the TV stuff generic code for the chipset that is enabled
> > by an option in Config.lb.
> >
> >
> > //Peter
> >
> > --
> > coreboot mailing list
> > coreboot at coreboot.org
> > http://www.coreboot.org/mailman/listinfo/coreboot
>
>
> --
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080419/fbf76be6/attachment.html>