[coreboot] r660 - coreboot-v3/mainboard/artecgroup/dbe62
svn at coreboot.org
svn at coreboot.org
Wed Apr 16 23:34:56 CEST 2008
Author: ward
Date: 2008-04-16 23:34:56 +0200 (Wed, 16 Apr 2008)
New Revision: 660
Modified:
coreboot-v3/mainboard/artecgroup/dbe62/stage1.c
Log:
artecgroup/dbe62: Set up 4MB mode for LPC dongle
This way we can fit a kernel and initramfs on the dongle's free ~3.75MB space
and have a debug system bootable right from inside the dongle. The start
address of the dongle is mem at 0xffc00000 for FILO with 4MB minus ROM area
available.
This should be a no-op when not booting from the dongle.
Signed-off-by: Mart Raudsepp <mart.raudsepp at artecdesign.ee>
Acked-by: Ward Vandewege <ward at gnu.org>
Modified: coreboot-v3/mainboard/artecgroup/dbe62/stage1.c
===================================================================
--- coreboot-v3/mainboard/artecgroup/dbe62/stage1.c 2008-04-16 16:40:45 UTC (rev 659)
+++ coreboot-v3/mainboard/artecgroup/dbe62/stage1.c 2008-04-16 21:34:56 UTC (rev 660)
@@ -59,6 +59,9 @@
* early MSR setup for the CS5536.
*/
cs5536_setup_onchipuart(2);
+
+ /* Set up 4MB mode for Artec LPC Dongle (this should be a no-op when not booting from the dongle) */
+ outb(0xf4,0x88);
}
void mainboard_pre_payload(void)
More information about the coreboot
mailing list