[LinuxBIOS] Ethernet problem with GeodeLX (db800) with running lxbios

[Marc Jones]

Marc Jones wrote:
> 
> Marc Jones wrote:
>> Steffen D. wrote:
>>> About the ethernet problem:

> OK. I think is see the problem. Bus Master Enable and Memory Enable 
> aren't enabled in the command register. I am not sure why the Memory 
> Enable isn't set. LinuxBIOS should set that and this seems to be a 
> problem in the LB generic pci init code (Anyone care to debug this?). I 
> think that the driver should enable the Bus Master and LB shouldn't need 
> to touch it (I would be interested in other opinions on this).
> 
> Try:
>  >setpci 00:0d.0 COMMAND=7
> 
> 
> Marc
> 
> 

Sorry, False alarm. I was using a linux image that didn't have the 
network drivers so the memory and the busmaster enables were disabled 
(by the kernel I assume).

Marc




-- 
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors